Lumens VC-A50PW - Page 34

English - 33
 Shutter Speed: Shutter settings
2. White Balance:
 Mode: Select the color temperature mode
 Open Push Trigger: Single color temperature execution adjustment
 Manual Red/Blue: Manually adjust blue/red color temperature
3. Focus:
 Mode: Select manual/automatic focus
 Focus Range: Set focus range
 AF Sensitivity: Set automatic focus sensitivity
 AF Speed: Set automatic focus speed
 AF Frame: Set automatic focus range
 PTZ Assist: Set Auto Focus in manual mode
4. Mirror:
 Mirror: Set automatic flip mode
7.3.8 Settings – Picture Setting
1. Picture Effect: Set the picture effect
2. 2D NR: 2D noise reduction settings
3. 3D NR: 3D dynamic noise reduction settings
4. Image Mode: The user may customize his/her desired image mode
5. Image Mode Load: Adjustable when Image Mode is set to Custom, similar to OSD
6. Black Level: Adjustable when Image Mode is set to Custom, similar to OSD
7. Gamma: Adjustable when Image Mode is set to Custom, similar to OSD
8. Skin Tone: Skin tone settings; adjustable when Image Mode is set to Custom, similar to OSD
9. Brightness: Adjustable when Image Mode is set to Custom, similar to OSD
VC-A50P
1
2
4
3
5
6
7
8
9
10
0
11
12
22
2