Lumens VC-A51P User Manual

English - 17
1st Level
Major Items
2nd Level
Minor Items
3rd Level
Adjustment Values
Function Descriptions
Auto Focus
AF Sensitivity
Low / Mid / High
For AF triggering speed, the higher the
speed is, the faster AF is triggered
AF Frame
Center Area / All Area
AF frame setting, when central area
was set as AF frame, focusing will be
on the center of the screen. When Full
Frame was set as AF frame, focusing
will be calculated based on the full
screen
PTZ Assist
On / Off
Turn on the auto focus function in
Manual
Ethernet
DHCP
On / Off
Enable/Disable DHCP setting using
left and right arrow keys and press
[ENTER] to apply setting.
IP Address
192.168.100.150
Press [ENTER] to be in modify mode;
select the item to be modified using
the up and down keys, and modify the
value using the left and right keys or
the numeric keys.
Subnet mask
255.255.255.0
Gateway
192.168.100.254
Audio
Audio In
Line In/ Mic In
Set Audio In
Audio Enable
On / Off
Turn on/off audio output
Audio Volume
0~C~10
Volume Setting
Audio Delay
On / Off
When audio and video are out of sync,
enable this feature to set the audio
delay time
Audio Delay
Time(ms)
-1~-500ms
Set audio delay time
Encode Sample
Rate
1. 48 KHz(AAC)
2. 44.1 KHz(AAC)
3. 16 KHz(AAC)
4. 16 KHz(G.711)
5. 8 KHz(G.711)
Set the encode type and sample rate
<Remark> SDI only supports 48
KHz audio output
<Remark> VC-A51PN only supports
48 KHz (AAC)/44.1 KHz (AAC)
settings
System
Prompt
On / Off
Turn on/off the prompt information on
the display
IR Receive
On / Off
Tally Lamp
On / Off
Select Off and it will not be triggered
by commands to turn on or off
Language
English / Chinese

Lumens VC-A51P Specifications

General

Brand	Lumens
Model	VC-A51P
Category	Security Camera
Language	English