Lumens VC-A51P User Manual

English - 18
1st Level
Major Items
2nd Level
Minor Items
3rd Level
Adjustment Values
Function Descriptions
Initial Position
Last MEM / 1st Preset
Select the camera lens to return to the
last operated position or the first
preset position after POWER ON
First default position = Preset 0
Control Device
Encoder / Controller
Control Device setting,
Controller: for joystick
Encoder: for tracking system
Motionless Preset
On / Off
When the function is enabled, the
screen will Freeze when Preset is
executed. Freeze will be released after
Preset is completed.
Protocol
VISCA/ Pelco D
Pelco D Address
1 ~255
The Protocol set to Pelco D allows the
camera ID address to be assigned
Output Mode
1080p 60/59.94/50/30/29.97/25
1080i 60/59.94/50
720p 60/59.94/50
Choose the output resolution
Factory Reset
On / Off
Resume the factory default setting
FW Upgrade
On / Off
Status
Display the current setting status

Lumens VC-A51P Specifications

General

Brand	Lumens
Model	VC-A51P
Category	Security Camera
Language	English