Lumens VC-A71P-HN User Manual

35
5.2.9 Setting - Network
No
Item
Function Descriptions
1
DHCP
Network setting of camera. Change of setting is available when DHCP
function is closed
2
HTTP port
Set HTTP port. The default Port value is 80
3
HTTPS port
Set HTTPS port. The default Port value is 81
4
Tracking Data Output
When enabled, PTZ position information can be reported when the camera
moves
1. Serial Output: Please set the protocol to VISCA and the baud rate to
38400
2. IP output: Set the destination IP address and port
3. The port numbers should be > 1024. 1935, 8555, 8556, 8557 cannot be
used.
<Remark> When Tracking Data Output is enabled, the camera performance may be
affected.
1
2
3
4

Lumens VC-A71P-HN Specifications

General

Brand	Lumens
Model	VC-A71P-HN
Category	Security Camera
Language	English