To Next Page

To Previous Page

PTZ Assist On / Off

This function can only be

enabled in the Manual

Focus (MF) mode

When PTZ Assist is

enabled and PTZ control

is in operation, the focus

performs only once upon

immediate execution.

The focus will not be

triggered afterward when

the scene changes

Ethernet

DHCP On / Off

Enable/Disable DHCP

setting using left and

right arrow keys and

press [ENTER] to apply

setting.

IP Address 192.168.100.100

Press [ENTER] to be in

modify mode; select the

item to be modified using

the up and down keys,

and modify the value

using the left and right

keys or the numeric

keys.

Subnet Mask 255.255.255.0