NETWORK
As a WiFi access point
The Poco by default serves as a WiFi access point (AP). This connection is good for updating rmware and importing and exporting con-
guration le as well as testing and conguration. The SSID is “poco-xxxx” where xxxx is a unique ID that is hardware dependent. Default
password is located on the back of your Poco device. WiFi settings can be customized/disabled under the Ethernet/WiFi conguration
on the maintenance page. WiFi IP address for connecting to server is 192.168.4.1 (some devices may support http://poco.local).
Connecting to an existing access point
The wireless connection can also be congured for connecting Poco to existing WiFi network on the Ethernet/WiFi conguration page. IP
address given will depend on DHCP server and can be determined from Access point connection status page.
Bluetooth
Poco is compatible with Bluetooth 4.0 or greater and supported Android and iOS devices with an application downloadable from Apple
App Store or Google Play Store.
Download for Apple
Download for Android
Wired Network
In order to use the 10/100 Base T network connection for communicating, the POCO device must be connected with a standard Ethernet
cable (not included) to a device . If all network ports are used for other system components, a network switch must be used to split the
network trafc between two or more networked devices.
Network Setup
28
To Next Page
Loading...
