SPECIFICATIONS
RESET MODES
USER ACTION
Short-press while Poco is running.
Must release before 5s.
Press-hold for > 5s while Poco is running,
then release.
Press-hold while powering-on Poco.
Hold for > 5s.
FUNCTION
Reboot poco (no change to settings).
Restore WiFi/BLE/Eth settings.
Factory restore all. - Wipes ota data
partition; which disables booting to any
OTA partitions. - Wipes internal fs (FAT)
partition; which clears any user congu-
ration. - Wipes nvs partition; which clears
WiFi/BLE/Eth settings.
FEEDBACK
No indication while holding down button.
After release button, status LED turns solid
‘aqua’ color while rebooting. Then resumes
normal pattern.
No indication while holding down button
for the rst 5 seconds, then rapidly blink
Green/Blue until release button.
Status LED turns solid ‘aqua’ color while
waiting for user to keep holding button.
There is no indication that user has held
down button long-enough. After release
button, Status LED continues solid ‘aqua’
color while booting. Then resumes normal
pattern.
Features
continued...
06
To Next Page
Loading...
