Getting Started
7. Choose “Restore Defaults” from the Mixer menu. This will insure that the sample clock source is
set to Internal, that the output levels are at maximum, and that no channels are muted.
8. Launch the Lynx Demo application by double-clicking the Demo32.exe file. The Lynx Demo
program should appear in the upper left corner of your screen. Make certain that the Play Device is
set to Lynx AES16 Play 1.
9. Click “File” and navigate to the computer’s Desktop, then select “SineWaveMinus16.wav” and
click “Open.”
10. Click “Play.” You should see the progress bar move from left to right.
AES16 User Manual 33
To Next Page
Loading...