Lynx Mixer Reference
1* Volume Faders
Theses faders provide digital attenuation of the output signal prior to D/A conversion. With the volume
fader at its maximum position, the vertical line within the fader turns black, to indicate zero attenuation. In
this case the audio stream is unaltered. This is the recommended position for critical recording and
mixdown sessions in which the highest signal quality is required. When the volume fader is not at its
maximum or minimum position, the vertical line within the fader turns red to indicate that the volume
control is active.
1( Peak Meters
These meters display the instantaneous peak level of the output signal.
2) Mute
This button enables the mute function for the associated output.
2! Output Dither
This button enables the addition of triangular probability density dither for each associated output. Dither is
recommended for improving signal fidelity when more than one monitor source is driving an output or
when the volume fader is not at its maximum.
AES16 User Manual 54
To Next Page
Loading...
Need help?
General