MacDon R80 - Page 85

MAINTENANCE/SERVICE
Form # 169053 83 Model Year - 2010
g. Remove two bolts (P) and remove guard (Q).
h. Loosen two bolts (R) and remove guard (S).
i. Rotate deflector (T) so that wider space between
bars face forward.
j. Remove four bolts (U).
k. Pull driveline (V) through deflector and slide U-
joint (W) off drive shaft.
l. Remove four bolts (X). Support gearbox (Y)
when removing last bolt.
m. Lift gearbox (Y) and manoeuvre from drive area,
top end first.
X
P
Q
R
S
U
V
W
T
Y
13 FT
Y
16 FT