- 20 -
Settings
General
1. Touch [ General ] in the settings page.
2. Touch to highlight a setting.
3. Touch on the option to display/select an option.
4. Touch [ Setting ] or press the Menu button on the front panel to exit.
General settings Options Description
Language English-Francais-Espanol-Italian-German
Radio Area
Europe
Select one that matches your location.
America
America4
East Europe
Australia
China
Beep
On
Turn on the beep sound. Each time you press a button,
the unit beeps.
Off Turn off the beep sound.
Calibration Yes Calibrate the touch screen.
Wall paper Enter You can select a wall paper.
Gps path setting.
Mic Setup Internal/external
Before setting, make sure that the external
microphone is installed.
Key setting Red/Green You can select a the key color.
Calibration
When the touch operation is not sensitive or valid, you should calibrate the
touch screen through calibration setting function.
Adjust the response positions of the touch panel as followings:
1. Press the [ Calibration ] option on the setup menu to enter.
2. Touch [ Start ] to enter.
3. Aim at center of [ + ], follow the path as shown of the figure, after steps from
1 to 5, touch anywhere on the screen to save and exit from calibration. Or wait for 30 seconds to
exit without making changes.
Adjust time
1. Touch [ Time ].
2. Touch an option repeatedly to select.
3. Touch the upper left corner of the screen to exit.
Time settings Options Description
Date
Year/
M o n t h /
Day
Touch [ ] or [ ] to set year, month and day.
Time Mode 12H/24H
Touch [12H] or [24H] to switch time mode.
Time
Touch [ ] or [ ] to set hour and minutes.
Time Zone GMT +/-
Touch to select the time zone you desire.
Clock screen On/Off
Clock display after turning off the unit manually
To Next Page
Loading...
Need help?
General
