CONTROL ELEMENTS
Multi-function display
80 Operating manual MT 32 / 36
Temperature display
After the ignition is switched on, the engine coolant tempera-
ture is displayed by default. Deviations from the nominal spec-
ifications that damage the MT are indicated by an LED in the
button, see “Indicators on the multi-function display” on
page 131.
Fig. 69: Temperature display
1 “Transmission oil temperature” button
2 “Engine coolant temperature” button
3 “Temperature” indicator
Selecting the temperature indicator
X Press button 1.
3 The transmission oil temperature is displayed in the
LCD display.
X Press button 2.
3 The engine coolant temperature is displayed in the
LCD display.
The selected indicator remains active until you switch
to a new indicator or switch off the ignition.
To Next Page
Loading...
