Magellan Meridian Series - Selecting NAV Units; Selecting the North Reference; Setting the Backlight Timer

55Magellan Meridian GPS Receiver
Reference
Selecting NAV Units — Allows you to select the units of measure that will
be used when displaying navigational data. Options are: Miles/MPH,
NM/Knots or KM/KPH.
From
Any
Screen
MENU
Highlight
Setup
Highlight
Nav Units
Select
Nav Units
ENTER
ENTER
ENTER
Default: Miles/MPH
Selecting the North Reference — Allows the selection of whether the
Meridian uses True North, Magnetic North, Military True or Military
Magnetic as its North reference.
From
Any
Screen
MENU
Highlight
Setup
Highlight
North Reference
Select
North
Reference
ENTER
ENTERENTER
Default: Magnetic
Setting the Backlight Timer — Allows you to set the time interval that
will be used to turn off the display backlight when not in use. Times
available are: 30 seconds, 1 Minute, 2 Minutes, 4 Minutes, 10 Minutes
or Timer Off.
From
Any
Screen
MENU
Highlight
Setup
Highlight
Light Timer
Select
Timer
Duration
ENTER
ENTERENTER
Default: 4 Minutes