14 Magellan Meridian GPS Receiver
Is there a limit to the number of waypoints I can store in the
Meridian? Yes, the Meridian will store up to 500 user waypoints
in memory. If you should ever get that many and need to input
more, you will have to delete ones that you no longer need to make
room.
A GOTO route is simply a route with a start point and a single destination
point: I am here and I want to go to there. All that is required to create a
GOTO route is having the destination waypoint saved in memory. This
waypoint can be one that you have saved earlier (which is stored in your
User Waypoint List) or any of the landmarks that come with the Meridian
in its built-in database.
Press GOTO. The first thing that has to be done is
to select the destination waypoint. This is done by
accessing the waypoint database. The first screen is
used to select the category of the database that the
waypoint is in and how it will be found,
alphabetically or nearest to your position, a city or the
cursor.
Selecting a Destination Waypoint from the Database using “Nearest”
Use the UP/DOWN arrows to highlight the
category that your destination waypoint is in. Use
the LEFT/RIGHT arrows to select how the
waypoints are displayed, Alphabetical, Near
Position, Near City or Near Cursor. In this case,
you will be using “Near Position”.
The example shown here is a sample of a City
Waypoint List. This is a sample of a Nearest City
Waypoint list for Magellan. Your screen will look
different.
Use the UP/DOWN arrows to highlight your choice of waypoint to be
your destination and press [ENTER].
The GOTO route is now active and you are returned to the last viewed
navigation screen.
To Next Page
Loading...
Need help?
General
