16
English
This opens a points list from which you can select the
control point name corresponding to where the base is
installed. This automatically sets the Location field to
the right coordinates.
• Station ID: A 4-character string (0.. 4095).
• Location: Coordinates of base position. See Site ID field
above.
• Elevation: Above ellipsoid.
• Units: Antenna height unit (meters, US feet or Int
feet).
• Antenna Height: From the reference point.
• Height Type: Slant or Vertical.
4. Tap Start. The ProMark3 RTK starts operating as a base.
RTCM 3.1 corrections are now broadcast via the radio
modem. The screen shows
the following parameters:
• Site ID: As a reminder
• Elapsed: Time elapsed since you started the base sta-
tion
• # Sats: Current number of satellites received
• PDOP
• Base Station Position
• Power indicator (all green: fully charged)
• Free memory indicator (all green: maximum)
Later, after you have finished your survey and you come back
to the base to switch it off, first tap Stop. The ProMark3 RTK
will instantly stop transmitting RTCM corrections.
To Next Page
Loading...
Need help?
General