Access Web UI
Manage your device via wired networks, USB NET, or Wi-Fi.
1. Connect your device to your LAN and power it up.
2. Access Web UI:
To ensure a smooth video, you are recommended to connect to a
wired network.
Tap on the LCD touch screen of the device front panel until you see a
QR code, scan the QR code, or type the IP address below the QR code
into your web browser.
Scanner (like smartphone) should be connected to the same local
network as your device.
When the IP address shows 192.168.48.1, follow the steps below to join
the device AP and access the Web UI.
i. Plug included Wi-Fi antenna when you want to connect to a
wireless network.
ii. In your smartphone/tablet/laptop, turn on WLAN, search for and
join the device AP named Ultra Encode + (Serial number).
The AP names after your gear's Serial number, and the password
is the last 8-number of the serial number by default. For example,
a serial number 313210101001 indicates the initial AP password is
10101001.
■
To Next Page
Loading...
