How to turn on/off AP mode
AP mode is on by default. Administrator can go to System > Network > AP section to turn on/off the AP mode and change AP password.
Can I set one live stream server to use the main stream and the other to use the sub stream?
Yes. You can select the main stream or sub stream for each session.
Can Ultra Encode stream to multiple destinations at the same time?
Supported streaming protocols: RTSP/RTMP/RTMPS/SRT Caller/SRT Listener/NDI |HX2/NDI |HX3/HLS/TS over UDP/TS over RTP/TVU ISSP
■
® ®
Allow simultaneous 6 sessions over multiple streaming protocols, containing 1 session of HLS, RTSP, NDI |HX2, or 2 NDI |HX2 (if included)
■
® ®
Specify main stream or sub stream for each streaming session
■
Stream 1 NDI |HX3 sessions, and they cannot stream simultaneously with other tasks
■
®
To Next Page
Loading...
