Magewell Ultra Encode AIO - Page 29

Check HDMI STATUS
NOTE: This parameter is available for HDMI products.
H total shows the total number of pixels, horizontally.
■
V total shows the total number of pixels, vertically.
■
H active shows the number of active pixels, horizontally.
■
V active shows the number of active pixels, vertically.
■
Mode shows the signal type (which is always HDMI for the HDMI product).
■
HDCP encrypted shows whether the signal source is HDCP encrypted.
In accordance with the related laws and regulations, the device doesn't
process HDCP encrypted signals, so the value is None.
■
VIC Video Identification Code, which is defined for CEA formats.
■
IT content shows whether the transmission package is content.
■
Pixel rate shows the maximum number of pixels the unit could possibly
write to the memory in one second.
■
Timing-H total shows the total number of pixels, horizontally.
■
Timing-H active shows the number of active pixels, horizontally.
■
Timing-H front porch shows the Front Porch width in pixels.
■
Timing-H sync width shows the Sync Pulse width in pixels.
■
Timing-H back porch shows Back Porch width in pixels.
■
Timing-V total shows the total number of pixels, vertically.
■
Timing-V active shows the number of active pixels, vertically.
■
29