Name: specify a name for current task to facilitate server management,
which will be displayed in server list. The name can be 1~30 character.
■
Stream: choose to stream main or sub stream, which can be customized in
Encode tab.
■
Audio Stream: options are Audio stream 1 ~ 4, and the default is Audio
stream 1. Audio stream parameters can be set in "Encode > AUDIO
STREAM".
■
Port: specify the service port of the encoder, ranging from 8000, and 10000
to 65535. The default value is 8000.
■
Latency: options are 30 ~ 8000ms and the default value is 120ms. We
recommend that you set the same latency for SRT caller and listener.
■
Bandwidth: indicate the portion of the total bandwidth of a stream required
for the exchange of SRT control and recovered packets. Available values are
5 ~ 100% and the default value is 25%. A worse network condition requires
more bandwidth for overhead to ensure normal transmission.
■
MTU: specify maximum transmission unit (MTU) in bytes, ranging from 232
to 1500. The default size is 1496.
■
Connections: 8 connections at most.
■
Encryption: specify encryption algorithm for stream data security. Options
are not used (default), AES-128/192/256.
■
To Next Page
Loading...
