NDI
NDI |HX2 and NDI |HX3 are supported.
® ®
Name: specify a name for current task to facilitate server management,
which will be displayed in server list. The name can be 1~30 character.
■
Program stream: Options are Main stream, Sub stream, and full black video
stream (640x360@30FPS).
■
Preview stream: Options are Main stream, Sub stream, and full black video
stream (640x360@30FPS). Both width and height of the stream resolution
must be no greater than 640.
■
Audio Stream: options are Audio stream 1 ~ 4, and the default is Audio
stream 1. Audio stream parameters can be set in "Encode > AUDIO
STREAM".
■
Source Video
■
Group name
Specify the Group name which the source belongs to. It is case-
insensitive, and should be a combination of A to Z, a to z, 0 to 9 and
special characters like _-. Multiple groups are supported, which should
be comma-separated.
By default, it is public.
■
Source name
By default, it is #serial-no#, serial number.
■
Transport Mode
■
UDP (Unicast) indicates that the encoder sends a UDP stream directly to
the receiver. It is used where lower latency matters. And multiple
simultaneous streams will work independently for multiple receivers.
■
To Next Page
Loading...
