Record to External SD Card/USB Drive
The device supports external SD card/USB flash drive in exfat, ntfs, and vfat
formats, up to 2T. And a vfat file should be less than 4G. Before recording,
please insert the corresponding storage medium.
Configure recording parameters
Click edit button and set recording parameters.
Record mode: Options are normal (default) and loop. In normal record
mode, the encoder will stop recording when the storage space is full.
However, loop record mode provides continuously recording which means
that old files will be overwritten by new ones when the storage is full.
■
Stream: Options are main (default) and sub stream.
■
Audio Stream: options are Audio stream 1 ~ 4, and the default is Audio
stream 1. Audio stream parameters can be set in "Encode > AUDIO
STREAM".
■
Video type: Options are mp4 (default), mov, and ts.
■
File path: REC_Folder by default, and 1 to 255 characters.
■
File name: Options are custom prefix (default, from 1 to 32 characters), and
creation time.
■
Filename prefix: VID by default, 1 to 32 characters.
■
Duration: from 5 to 240 minutes. That is, a new file is generated for each
specified duration. A new file is generated every time the specified duration
is recorded. The file size generated by different recording durations is
automatically calculated according to the stream format and is for reference
only. Duration can be set to No limit for normal (Record mode) recording in
ts (Video type) format.
■
To Next Page
Loading...
