Maggi BIG 800 User Manual

Cod.00008254 REV.02 / 06-2012
JUNIOR 640
BIG 800
BEST 960
BEST 1250
88
tel. +39 0571 635405
fax +39 0571 664275

Maggi BIG 800 Specifications

General

Brand	Maggi
Model	BIG 800
Category	Saw
Language	English

Summary

CHAPTER 1 - GENERAL INFORMATION

1-1 OPERATING REMARKS

Instructions for safe and proper machine operation.

1-3 SAFETY PROTECTIONS

Technical solutions and modifications ensuring machine safety.

1-4 INDIVIDUAL PROTECTION AIDS

Essential personal protective equipment for safe machine operation.

1-5 TECHNICAL SPECIFICATIONS

Detailed specifications for Junior, Big, Best models.

1-10 DIRECTIONS FOR INSTALLATION

1-11 DISCONNECTING PROCEDURE

Step-by-step guide for safely disconnecting the machine.

CHAPTER 2 - INSTALLATION

2-1 ASSEMBLING NOTES

2-3 SETTING UP THE BENCH

2-4 FITTING THE TOOL-HOLDING ARM AND THE RELATED CONTROLS

Procedure for attaching the tool-holding arm and controls.

2-5 FITTING THE TOOL-HOLDING HEAD

2-6 SETTING UP THE WORKTABLE

2-7 FITTING THE BLADE GUARD

Guidelines for fitting and the importance of the blade guard.

2-8 FITTING OR REPLACING THE BLADE

Procedure for safely installing or changing the saw blade.

2-10 CONNECTING THE SQUARING MACHINE TO THE MAINS

Instructions for connecting the machine to the power supply.

CHAPTER 3 - USE AND ADJUSTMENTS

3-1 PERPENDICULARITY OF THE TOOL TO THE WORKTABLE

Adjusting the blade's perpendicularity to the worktable.

3-2 SQUARING THE ARM WITH THE ABUTTING STRAIGHTEDGE

Aligning the arm with the straightedge for accurate cuts.

3-3 PARALLELISM OF THE BLADE WITH REFERENCE TO THE CARRIAGE TRAVEL

3-5 TOOL TILT ADJUSTMENT WITH REFERENCE TO THE WORKTABLE

CHAPTER 4 - MAINTENANCE

4-1 ADJUSTING THE SELF-BRAKING MOTOR BRAKING EFFECT

Adjusting the motor's braking effect for proper blade stopping.

4-2 PERIODICAL LUBRICATION AND CLEANING OF THE MACHINE

4-3.1 CARRIAGE-SLIDEWAYS PLAY

Eliminating play in the carriage's sliding movement.

4-3.2 PILLAR-BASE PLAY

4-3.3 ARM-PILLAR PLAY

CHAPTER 5 - ELECTRICAL DIAGRAM

5-1 MONOPHASIC MOTOR - MOTOR SAFE-BOX

5-2 WIRING CONNECTION TO TERMINAL BOARD

5-3 THREE-PHASE MOTOR - MOTOR SAFE-BOX

5-4 WIRING CONNECTION TO TERMINAL BOARD