Maggi JUNIOR 640 - User Manual

Cod.00008254 REV.0 / 01-10-04 / 048943
JUNIOR 640
BIG 800
BEST 960
BEST 1250

Summary

General Information and Machine Identification

Chapter 1: General Information

Operating Remarks, Description, and Tools

Safety Protections and Individual Aids

Technical Specifications and Intended Use

Handling, Haulage, and Dimensions

Installation and Disconnection Procedures

Chapter 2: Installation

Assembling Notes, Clearances, and Bench Setup

Guides on machine assembly, required clearances, and setting up the base bench.

Fitting Tool-Holding Arm and Head

Instructions for attaching the tool-holding arm and the tool-holding head.

Worktable Setup and Blade Guard Fitting

Details on setting up the worktable and fitting the safety blade guard.

Blade Replacement and Arm Positioning

Procedures for replacing the blade and fitting the quick arm positioning lever.

Mains Connection and Machine Setup

Chapter 3: Use and Adjustments

Tool Perpendicularity and Arm Squaring

Explains how to ensure the blade is perpendicular to the worktable and arm.

Blade Parallelism and Radial Adjustments

Guides on correcting blade parallelism and adjusting the arm for cutting angles.

Tool Tilt Adjustment and Worktable Prep

Instructions for tilting the blade and preparing the worktable for initial cuts.

Chapter 4: Maintenance

Motor Braking Effect and Lubrication;Cleaning

Reducing Component Plays and Noise Emission

Machine Out of Commission Procedures

Chapter 5: Electrical Diagrams

Maggi JUNIOR 640 Specifications

General

Brand	Maggi
Model	JUNIOR 640
Category	Saw
Language	English