Maggi JUNIOR 640 - Machine Out of Commission Procedures

23
UK
4-4 NOISE EMISSION
Below are listed, required by law, the noise
data relating to the different models.
The indicated maximum noise level is without
soundproofing.
LEQ (dbA) < 87,8 < 87,8 < 87,8 < 87,8
Machine type Junior
640
Big
800
Best
960
Maximum noise
level
at work post
< 92 < 92 < 96,3 < 96,3
4-5 OUT OF COMMISSION OF THE
MACHINE
If the machine has to be positioned out of
commission, it is necessary to follow carefully
the instruction below,to save the safety of op-
erators or / and environment.
After having followed the insulating operation it
is necessary.
Disassemble the blade, and if it is unserviceble,
place it in a suitable container to avoid possible
impacts against the sharp edges.
- Disassemble electrical parts, in order to use
them again after a check.
- Disassemble metal parts, batching them as
type of material.
- Call a skilled company for the recovery and
elimination of metal parts.
Best
1250
If the machine has to be positioned out of
commission, it is necessary to follow carefully
the instruction below,to save the safety of op-
After having followed the insulating operation it
Disassemble the blade, and if it is unserviceble,
place it in a suitable container to avoid possible
impacts against the sharp edges.
- Disassemble electrical parts, in order to use
them again after a check.
- Disassemble metal parts, batching them as
type of material.
- Call a skilled company for the recovery and
elimination of metal parts.