Maggi JUNIOR 640 - Technical Specifications and Intended Use

8
1-5 TECHNICAL SPECIFICATIONS
Blade diameter (mm)
Hole diameter (mm)
Size of driving shaft (mm)
Three-phase motor power (Kw)
Single-phase motor power (Kw)
Motor revs (r.p.m.)
Intake opening on blade guard (mm)
Intake opening on back hood (mm)
Table size (mm)
Max cutting length (mm) [Ø350]
Max cutting length max (mm) [Ø400]
Max height cutting width (mm) [Ø350]
Max height cutting width (mm) [Ø400]
Max cutting height (mm) [Ø350]
Max cutting height (mm) [Ø400]
Max blade height from plane (mm) [Ø350]
Max blade height from plane (mm) [Ø400]
Max blade cutting height at 45° (mm) [Ø350]
Max blade cutting height at 45° (mm) [Ø400]
Max cut with arm at 45° (right) (mm)
Max cut with arm at 45° (left) (mm)
Net weight (Kg)
Gross weight (Kg)
Size of package (mm)
Ø350
Ø30
Ø25x80
3
2,2
2800
Ø60
Ø100
975x1580
20x550
20x545
100x480
125x450
100
125
70
45
60
80
20x380>100x330
20x190>100x140
180
220
1400x850x530
Ø 350
Ø 30
Ø 25x80
3
2,2
2800
Ø 60
Ø 100
1145x1860
20x710
20x705
100x640
125x610
100
125
70
45
60
80
20x500>100x450
20x310>100x260
198
246
1400x850x530
Ø 350
Ø 30
Ø 25x80
3
2,2
2800
Ø 60
Ø 100
1290x2000
20x870
20x865
100x800
125x770
100
125
110
85
60
80
20x615>100x565
20x425>100x375
269
331
1500x1000x550
Ø 350
Ø 30
Ø 25x80
3
2,2
2800
Ø 60
Ø 100
1580x2400
20x1160
20x1155
100x1090
125x1060
100
125
110
85
60
80
20x800>100x770
20x610>100x580
285
347
1800x1000x1000
Junior 640 Big 800 Best 960 Best 1250
DESCRIPTION
1-6 INTENDED USE
It is recommended for the radial arm saws
machines to be exclusively used for the opera-
tions described in this manual, including nor-
mal maintenance operations.
The machines are designed in particular for
perpendicular and 45° cutting with refer-
ence to the abutting square.
It is therefore advisable to look the instruc-
tion manual over before assembling the
machine. Any modification, use or inter-
vention other than those provided for rep-
resents an anomalous condition which,
besides damaging the machine, can be ex-
tremely dangerous for the operator.
WARNING
WARNING
Ø 350
Ø 30
Ø 25x80
3
2,2
2800
Ø 60
Ø 100
1580x2400
20x1160
20x1155
100x1090
125x1060
100
125
110
85
60
80
20x800>100x770
20x610>100x580
20x380>100x330
20x190>100x140
180
220
1400x850x530
100x640
125x610
100
125
70
45
60
80
20x500>100x450
20x310>100x260
198
246
1400x850x530
2,2
2800
Ø 60
Ø 100
1290x2000
20x870
20x865
100x800
125x770
100
125
110
85
60
80
20x615>100x565
20x425>100x375
269
331
1500x1000x550
Junior 640 Big 800 Best 960 Best 1250
mal maintenance operations.
The machines are designed in particular for
perpendicular and 45
ence to the abutting square.