11
UK
1-10 DIRECTIONS FOR INSTALLA-
TION
To keep the machine in perfect working condi-
tion and to ensure precise and safe operation
for a long time, scrupolously follow the direc-
tions for installation given below.
- The machine must be installed in a closed,
dry place, with a temperature of +10°C to
+40°C.
- Sufficient space must be left clear around the
machine, so as to prevent the operator from
being jammed between the moving parts of
the machine and any surrounding object.
- The feeder cable must be laid in such a way
that it does not cause the operator to stumble.
- Mains voltage variations must not exceed
±10%.
- The earth wire of the machine must be con-
nected to the earth wire of the plant.
1-11 DISCONNECTING PROCEDURE
Before carrying out any operation on the
machine, the following two-step disconnecting
procedure is to be followed:
A: Disconnect the machine from the mains.
B: Make sure that no power is being supplied
and that no residual energy is present.
A single person is to be responsible for the
carrying out of both operations.
Whenever the machine fails to operate, per-
form the above-mentioned disconnecting pro-
cedure and point out the situation with a clearly
visible inscription.
Fig.3
- The earth wire of the machine must be con-
nected to the earth wire of the plant.
1-11 DISCONNECTING PROCEDURE
Before carrying out any operation on the
machine, the following two-step disconnecting
procedure is to be followed:
A: Disconnect the machine from the mains.
B: Make sure that no power is being supplied
and that no residual energy is present.
A single person is to be responsible for the
carrying out of both operations.
Whenever the machine fails to operate, per-
form the above-mentioned disconnecting pro-
cedure and point out the situation with a clearly
To Next Page
Loading...
