Maggi BORING SYSTEM 23 - Page 12

1.5 INDIVIDUAL PROTECTION DEVICES AND RESIDUAL RISKS
Despite all adopted safety protection devices, following situations may be dangerous, due to the normal use
of the machine and to the main characteristics of the material to be drilled:
 falling or throwing wood splinters during processing
 entangling parts of clothes in moving parts of the machine
 danger of fire
 danger of electrocution
 danger of damage due to noise emission
 danger of damage due to dust emission
 danger due to crushing and cutting
To prevent risks during placing, installation, adjustment, use, ordinary and extraordinary maintenance, we
strictly recommend to use the following individual protection devices (DPI):
 gloves (for example during machine parts and tools handling)
 anti-crushing and anti-sliding shoes
 glasses or face-shields against chip or wood sliver during working or cleaning operation of the machine
 anti-dust masks
Moreover, the clothes must be suited to avoid danger of:
 catching
 dragging
 crushing
 sliding
 abrasion
Contact lenses are prohibited.
DPI - WEAR PROTECTIVE
CLOTHES
DPI - WEAR SAFETY
(MECHANICAL) GLOVES
DPI - WEAR SAFETY SHOES
DPI - WEAR GOOGLES
DPI - WEAR ANTI-DUST
MASK
MAGGI TECHNOLOGY - BORING SYSTEM 23 - REV00 Pag. 5
ANY ADULTERATION OR REMOVAL OF SAFETY PROTECTION DEVICES CAN CAUSE
SEVERE DAMAGE.
ANY REMOVAL, EXCLUSION OR MODIFICATION OF THESE DEVICES IS STRICTLY
FORBIDDEN.
PERFORM FREQUENT CHECKS TO VERIFY AND GUARANTEE THE PERFECT RUNNING
OF SAFETY PROTECTION DEVICES .
ANY DEFECT OR PROBABLE DRAWBACK MUST BE IMMEDIATELY RESOLVED.