Maggi BORING SYSTEM 23 - Page 6

INDEX
N° TITLE PAGE
1 SAFETY RULES AND GENERAL INFORMATION 1
1.1 RECOMMENDATION FOR USE AND MAINTENANCE 1
1.2 GENERIC NOTES 2
1.3 OPERATIVE WARNINGS 2
1.4 PICTOGRAMS AND SYMBOLS 3
1.5 INDIVIDUAL PROTECTION DEVICES AND RESIDUAL RISKS 5
2 MACHINE DESCRIPTION 6
2.1 MACHINE IDENTIFICATION 6
2.2 INTENDED USE 7
2.3 MATERIALS 7
2.4 USABLE TOOLS 7
2.5 IMPROPER USE 7
2.6 TECHNICAL DATA 8
2.7 NOISE EMISSIONS 8
2.8 DUST EMISSION 9
2.9 ACCESSORIES 9
3 HANDLING AND TRANSPORT 10
4 INSTALLATION 11
4.1 PLACING THE MACHINE 11
4.2 WORKING AREA 11
4.3 LEVELLING THE MACHINE 11
4.4 ASSEMBLY AND PRELIMINARY PREPARATION FOR SET UP 12
5 MACHINE CONNECTION TO EXTERNAL POWER SUPPLY 15
5.1 CONNECTION TO ELECTRICAL POWER SUPPLY 15
5.2 PNEUMATIC AIR CONNECTION 16
5.3 DUST SUCTION SYSTEM CONNECTION 17
6 OPERATING INSTRUCTIONS 18
6.1 CONTROL PANEL 18
6.2 WORKING CYCLE 19
6.3 DRILLING DEPTH ADJUSTMENT 20
6.4 DRILLING HEAD PARALLELISM ADJUSTMENT 23
6.5 DRILLING HEAD - VERTICAL POSITIONING 23
6.6 DRILLING HEAD - HORIZONTAL POSITIONING 24
6.7 DRILLING HEAD - POSITIONING AT AN ANGLE BETWEEN 0° AND 90° 24
6.8 USE OF THE REFERENCE STOP FOR STANDARD 0°-90° MACHINING 25
6.9 USE OF THE 1,5 + 1,5 MT STANDARD EXTENSION FENCE 26
6.10 TRANSVERSE POSITION OF EXTENSION FENCE 26
6.11 LONGITUDINAL POSITION OF THE EXTENSION FENCE 27
6.12 USE OF THE REFERENCE PIN 27
6.13 USE OF THE TRIANGLE FOR 45° FRAMES 28
6.14 USE OF THE CENTRAL BAR FOR STRAIGHT 90° FRAMES 28
7 WORKING EXAMPLES 29
8
MAINTENANCE
33
8.1 INSULATION PROCEDURE 33
8.2 ORDINARY MAINTENANCE 33
9 COMMON FAILURES: REASONS AND REMEDIES 35
10 PUTTING THE MACHINE OUT OF SERVICE 37
11 ELECTRIC DIAGRAM AND PNEUMATIC DIAGRAM 37
12 GUARANTEE 37
13 SPARE PARTS 40