Magmaweld RD 500 E - Final Mains Connection Procedure

EN
www.magmaweld.com
RD 500 E
15
USER MANUAL | KULLANIM KILAVUZU
Installation
• Check the 3-phase with a voltmeter before connecting the machine to the mains. After detecting that each phase is 400V
(± 40V), plug in the plug.
• Switch on the machine with the On / O switch.
• Turn o the machine by turning the switch back to the “0” position after hearing the fan noise and seeing the voltmeter
and ammeter light on.
Fgure 6: Mans Connecton
When nsertng the plug nto the wall socket, the machne Make sure t s n the “0” poston.
2.6 Connection To The Mains