Flex Pro Transmitter Instruction Manual
April 2019
Page 25 of 25
6 Declaration of Conformity
EU Declaration of Conformity Certificate
For the following equipment:
Product : FlexPro Series Radio Remote Control
Product Receiver Models : CAN-2, MHR, WIC-2402, inteleSmart2, Flex M
Manufacturer’s Name : Magnetek, Inc.
Manufacturer’s Address : N49 W13650 Campbell Drive
Menomonee Falls, WI 53051 USA
The undersigned hereby declares on behalf of Magnetek, that the above-referenced products, to which this declaration relates, is in
conformity with the provisions of CE Mark Directive (93/68/EEC), Machinery Safety Directive (MD) 2006/42/EC, Radio Equipment
Directive (RED, 2014/53/EU), EMC Directive (2014/30/EU), and the ROHS2 Directive (2011/65/EU).
The standards relevant for the evaluation of the product referenced above conformity to the directive requirements are as
follows:
EN 301 489-1 v1.9.2:2011-09
EN 301 489-17 v2.1.1:2009-05
EN 300 220-1 v2.3.1:2010
EN 300 220-2 v2.3.1:2010
EN 60204-1:2006
EN 60204-32:2008
EN ISO 12100:2010
EN ISO 13849-1:2008
EN ISO 13849-2:2003
EN 13557:2003+A2:2008
EN 60529:1992
The European contact for Magnetek is: Brian Preston
Magnetek
Unit 3, Bedford Business Centre
Mile Road
Bedford
MK42 9TW
United Kingdom
Per Annex II.B of the Machinery Directive (2006/42/EC):
The machinery, product, assembly or sub-assembly covered by this Declaration of Conformity must not be put into service until the
machinery into which it is to be incorporated has been declared in conformity with the provisions of the applicable Directive(s). This
statement is only necessary where the product is to be incorporated into a machine or system (e.g. a safety component).
Signature of Authorized Person:
Engineering Development Manager
Columbus McKinnon Corporation
Date of Issuance: 31 January 2019 Peter Stipan
Director of Development
Columbus McKinnon Corporation
Menomonee Falls, WI USA
To Previous Page
Loading...
