Magnetic MHTM FlowMotion mWing - Setting up Foundation and Placing Empty Conduits

36
mWing
Installation and assembly
7.4.3 Setting up foundation and placing empty conduits
1. Excavate the foundation hole according to the foundation and empty con-
duit plan.
2. If installed outdoors, lay the reinforcement braid.
3. Place empty conduits according to the foundation and empty conduit plan
in the foundation hole.
4. Close empty conduit to prevent water from entering.
5. Concrete the foundation.
6. Create smooth coating.
7. Let concrete cure.
8. Apply moisture protection for outdoor installation.