42
mWing
Installation and assembly
7.6 Align the pedestrian gate
When installing several pedestrian gates, align the pedestrian gates to the cus-
tomer's specifications and to the on-site conditions, e.g. walls, tile joints and
railings, using a laser or scale.
7.7 Mounting the mWing
7.7.1 Mounting variant "Direct mounting"
With this mounting variant, you mount the pedestrian gate directly on a foun-
dation.
Required material (not enclosed):
› Attachment set BSS100 for mounting the pedestrian gate directly on a foun-
dation
Prerequisites
› The foundation was built.
› The empty conduits were laid.
› The foundation has cured.
To Next Page
Loading...