55
mWing
Installation and assembly
3. Assemble side part. A click sound is heard each time it clicks into place.
NOTICE
Do not trap any cables when closing the side parts.
Mag10017
Fig. 25: Assembly of the side part
4. Assemble cover. The cover is held on by magnets.
CAUTION
Danger of crushing! Hold the cover with both hands only on the side. Do
not hold the cover at the top or bottom edge.
› Attach the cover.
› Tilt the cover backwards until the magnets close the cover.
Fig. 26: Assembly of the cover
To Next Page
Loading...