Mahindra YUVRAJ 215 - Page 22

22
31 Remove the two nut of inlet manifold
(Spanner size :17mm) & remove the
manifold & gasket.
32 Remove the two Nut of exhaust manifold
(Spanner size 17mm) & remove the exhaust
manifold.
33 Remove the three bolts of (Spanner size
12mm) alternator brace & remove the
brace.
34 Remove the alternator by removing the
bolt.
35 Remove the two bolts of alternator bracket
& remove the bracket.(Spanner size 8mm)
36 Remove the two bolts of breather assembly
(Spanner size 10mm) and separate it.
Intake
Manifold
Mounting
Nut
Mounting
Nut
Exhaust
Manifold
Mounting
Bolt
Alternator
Brace
Mounting
Bolt
Alternator
Mounting
Bolt
Alternator
Bracket
Breather
Assy.
Engine