Maico easyTymp Operating Manual

easyTymp® Operating Manual
9
3.2.1.7 Changing probes
To release the probe press the button at the back and
pull the probe out.
Do not pull the cord of the extension cord as this can
damage the tubing connections!
Place the probe to the easyTymp® by lining up the red
triangles and pushing the probe into the unit.
The probe can be attached to the extension cord by
li
ning it up correctly and clicking the probe into the end
of the extension cord.

Maico easyTymp Specifications

General

Brand	Maico
Model	easyTymp
Category	Medical Equipment
Language	English