easyTymp® Operating Manual
31
Calibrated
Calibrated Calibrated
Calibrated
Transducers:
Transducers:Transducers:
Transducers:
Probe System: Ipsilateral Earphone: is integrated in the
probe system
Probe frequency transmitter and receiver and
pressure transducer is integrated in the probe
system
Accuracy
AccuracyAccuracy
Accuracy
General: Generally the instrument is made and
calibrated to be within and better than the
tolerances required in the specific standard
Reflex Frequencies: ±3%
Ipsilateral Reflex Tone Levels: ±5% or ±10 daPa, whichever is greater
Compliance Measurement: ±5% or ±0.1ml, whichever is greater
Specification of Input / Output Connections
Outputs:
Outputs:Outputs:
Outputs:
Transducer Proprietary Pin 1: CH1 out
12-pole Pin 2: CH1 GND
Pin 3: DGND
Pin 4: GND A / GND Microphone
Pin 5: Microphone – input / Analog Balanced in
Pin 6: Microphone + input / Analog Balanced in
Pin 7: Power Supply +3/+5 V
Pin 8: CH2 Out
Pin 9: CH2 GND
Pin 10: I2C CLK
Pin 11: I2C DATA
Pin 12: I2C Interrupt
USB USB type “B” USB port for
Communication
To Next Page
Loading...
