Maico Ero Scan Pro User Manual

Operating Instructions
9
Turn off the ERO•SCAN Pro and insert the external probe plug into the
socket on the top of the ERO•SCAN Pro. The plug will fit only in one
direction. The arrows on the plug should face the display on the
ERO•SCAN Pro.
Turn on the ERO•SCAN Pro. The status indicator on the external probe
keypad will be solid green indicating the ERO•SCAN Pro has detected
the presence of the remote probe. Disconnect and reinsert the
connector if the status indicator on the probe is not illuminated or is
yellow rather than green. To return to using the internal probe of the
handheld, turn the instrument off, disconnect the external probe and
power up the instrument again.
Note: Misalignment of the plug and socket when installing the remote probe can cause damage to the
p
ins in the plug and the pin receptacles in the socket. The plug and socket should be visually inspected
p
rior to each installation of the remote probe. If damage is observed, contact your Special Equipment
D
istributor or Maico Diagnostics.

Maico Ero Scan Pro Specifications

General

Brand	Maico
Model	Ero Scan Pro
Category	Medical Equipment
Language	English