Operating Instructions
37
To change this setting, select
Patients
from the
Set Up
menu. Using the up and down arrow
buttons on the control panel select
No Patients
or
Numbered Patients
and then press the right arrow
button to
select
and exit.
Note: The ERO•SCAN Pro also supports the upload of patient names by way of the optional Patient
Management software. See Patient Management Manual (1162-0806) for more information.
8.8 Sounds
ERO•SCAN
Pro provides audible feedback to the user to indicate
when testing is complete.
To change this setting, select
Sounds
from the
Set Up
menu. Using
the up and down arrow buttons on the control panel select
on
or
off
and then press the right arrow button to
select
and exit.
8.9 Graph Style
There are three options for viewing the DPOAE test results: SNR
graph, Value graph, and DP/TE-
Gram. These are explained in
section 5.1.
To Next Page
Loading...
Need help?
General
