MakerBot Replicator 2X - Page 40

40
MAKING A TEST OBJECT FROM THE SD CARD CONTINUED
CHAIN LINKS
File Name: Chain Links
Make Time: 12 Minutes
Design By: Sal
Thingiverse: 28405
NUT AND BOLT SET
File Name: Nut and Bolt
Make Time: 27 minutes
Design By: aubenc
Thingiverse: 9095
COMB
File Name: Comb
Make Time: 14 Minutes
Design By: repraprook
Thingiverse: 1140
STRETCHY BRACELET
File Name: Stretchlet
Make Time: 16 minutes
Design By: Emmett
Thingiverse: 13505
MR JAWS
File Name: Mr Jaws
Make Time: 18 minutes
Design By: Mahoney
Thingiverse: 14702
CUPCAKE
File Name: Cupcake
Make Time: 52 minutes
Design By: Will Langford
Thingiverse: 16824
*
*
Dual extrusion prints require two colors of MakerBot ABS filament loaded into your
MakerBot Replicator 2X.
PET MONSTER VALENTINE
File Name: Heartless Dragon
Make Time: 40 minutes
Design By: andreas, tbuser
Thingiverse: 29088
*
TRAFFIC CONE
File Name: Trac Cone
Make Time: 42 minutes
Design By: CocoNut
Thingiverse: 21773
*
MAKERBOT PENDANT
File Name: pendant
Make Time: 8 minutes
Design By: Todd
Thingiverse: 25556
*