MakerBot Replicator 2X - How It Works

The MakerBot Replicator 2X Experimental 3D Printer makes solid, three-
dimensional objects out of melted MakerBot Filament. Your 3D design
files are translated into instructions for the MakerBot Replicator 2X and
read by the machine via SD card. The MakerBot Replicator 2X then heats
the MakerBot Filament and squeezes it out through a nozzle onto a heated
surface to build a solid object, layer by layer. This method is called Fused
Filament Fabrication [FFF].
HOW IT WORKS
9WELCOME