REFERENCE
REFERENCE
26
27
PROBLEM SOLUTION
Can’t access the Library,
Explore, and Store sections
of MakerBot Desktop.
You may not be logged into your MakerBot
account. These features are accessible only when
you are logged in. If you are logged into your
MakerBot account but are still unable to access
the Library, Store, and Explore sections, your
computer may not be connected to the internet.
MakerBot Desktop does
not recognize the MakerBot
Replicator Mini.
Make sure you have selected the MakerBot
Replicator Mini as the printer you want to
connect to in MakerBot Desktop. Go to Devices
> Connect to a New Device, and select the
MakerBot Replicator Mini from the list of
available networked printers.
The MakerBot Replicator
Smart Extruder is installed,
but MakerBot Desktop
displays a message
stating it is not installed.
Remove the Smart Extruder. Follow
the instructions in MakerBot Desktop
for reattaching it.
I don’t see a camera feed in the
print monitor panel.
Make sure your MakerBot Replicator Mini is
connected to a Wi-Fi network. The camera will
not work if connected only via USB cable.
SPECIFICATIONS
PRINTING
Print Technology: Fused deposition modeling
Build Volume: 10.0 W x 10.0 D x 12.5 H cm [3.9 W x 3.9 D x 4.9 H in]
Layer Resolution: 200 microns
Filament: 1.75 mm [0.069 in] MakerBot PLA Filament
Nozzle Diameter: 0.4 mm [0.015 in]
Print File Type: .makerbot
SOFTWARE
Soware Bundle: MakerBot Desktop
3D Model File Types: .stl, .obj, .thing
Supported OS: Windows (7+), Mac OS X (10.7+), Linux (Ubuntu 12.04+, Fedora 19+)
PHYSICAL DIMENSIONS
Printer: 29.5 W x 31.0 D x 38.1 H cm [11.6 W x 12.2 D x 15.0 H in]
Shipping Box: 38.7 W x 39.7 D x 52.7 H cm [15.3 W x 15.6 D x 20.8 H in]
Printer Weight: 8 kg [18 lbs]
Shipping Weight: 10 kg [22 lbs]
TEMPERATURE
Ambient Operating
Temperature: 15-26°C [60-78°F]
Storage Temperature: 0-38° C [32-100° F]
ELECTRICAL
Power Requirements: 100-240 V, 50/60Hz, 0.75-0.41 A, 100 W
Connectivity: USB, Wi-Fi
MECHANICAL
Construction: PC ABS with powder-coated steel reinforcement
Build Surface: Injection molded acrylic
Stepper Motors: 1.8° step angle with 1/16 micro-stepping
XY Positioning Precision: 11 microns [0.0004 in]
Z Positioning Precision: 2.5 microns [0.0001 in]
CAMERA
Camera Resolution: 320 x 240
TROUBLESHOOTING
CONNECTIVITY PROBLEMS
To Next Page
Loading...
