To Next PageTo Next Page
Need help?Do you have a question about the Malabar 795 and is the answer not in the manual?
Detailed technical specifications for the Malabar Model 795 Tripod Jack.
Overview of the Malabar Fixed Height Tripod Jack Model 795.
Procedures for assembling, calibrating, and filling the jack before operation.
Guide to calibrate the jack's bubble level for accurate positioning.
Checklist for inspecting the jack's condition and readiness for use.
Instructions for positioning, lifting, and lowering aircraft loads safely.
Routine maintenance and fluid level checks for the jack.
Procedures for inspecting components during disassembly for wear and damage.
Steps for load testing and adjusting relief valves to ensure proper function.
Solutions for common jack operational problems and their causes.
List of required special tools and recommended spare parts for maintenance.
Schematics illustrating the pneumatic and hydraulic systems of the jack.
Electrical wiring diagram for the jack's motor and control systems.
Diagram and list of parts for the primary jack assembly.
Detailed illustration and component list for the cylinder assembly.
Illustration and component list for the valve block assembly.
Detailed illustration and component list for the hand pump assembly.
Illustration and component list for the air pump kit.
Illustration and component list for the electric motor/pump kit.
Illustration and component list for the load gauge kit.
Illustration and component list for the adjustable foot kit.
Illustration and component list for the adjustable foot kit with hydraulic caster.
Detailed illustration and component list for the hydraulic caster assembly.
Illustration and component list for the valve block and hand pump assembly.
Illustration and component list for the shock absorber kit.
Illustration and component list for the ladder assembly kit.
Illustration and component list for the remote control kit.
General