Fire damper - FDMRPage 2 Version 2023-06-15
TPM 140/19
These technical specifications state a row of manufactured sizes and models of fire dampers FDMR
It is valid for production, designing, ordering, delivery, maintenance and operation.
CONTENT
I. GENERAL...........................................................................3
Description....................................................................3
II. DESIGN.............................................................................4
Design with manual control..........................................4
Design with spring return actuator...............................6
Design with the communication and supply device12
Communication and control device BKS 24-1B and
BKS 24-9A................................................................17
III. DIMENSIONS.................................................................19
Technical parameters.................................................24
IV. INSTALLATION..............................................................25
Placement and installation.........................................25
Statement of installations...........................................27
In solid wall construction.........................................28
Installation outside solid wall constrution..............35
In gypsum wall construction....................................38
Installation outside gypsum wall constrution.........46
Installation in sandwich wall construction..............49
Shaft walls...............................................................50
In solid ceiling construction.....................................53
Installation outside solid ceiling constrution...........57
Installation frames......................................................61
Installation frame R1, R2.........................................62
Installation frame R3, R4.........................................71
Installation frame R5...............................................74
Installation frame R6...............................................81
Installation frame R7...............................................84
V. SUSPENSION SYSTEMS..................................................87
Example of duct connection.......................................90
VI. TECHNICAL DATA..........................................................91
Pressure loss...............................................................91
Noise data...................................................................92
VII. MATERIAL, FINISHING.................................................93
VIII. TRANSPORTATION, STORAGE AND WARRANTY.........94
Logistic terms..............................................................94
Warranty.....................................................................94
IX. ASSEMBLY, ATTENDANCE AND MAINTENANCE...........95
Entry into service and revisions..................................97
X. ORDERING INFORMATIONS...........................................99
Ordering key...............................................................99
Data label..................................................................100
To Next Page
Loading...
