To Next Page

To Previous Page

PREVENTIVE MAINTENANCE PROCEDURE

CHALLENGER Series II Bulletin No. EL1

Maintenance Point

Frequency Interval

Procedure Information

Check and clean as required the lower electrical component enclosure air vents and circulation fan of any accumula-

tion of lint or dirt.

Daily

Tools Required:

Shop Style Vacuum Cleaner

Soft brush vacuum attachment

1. Disconnect, lock out and tag the electrical and pneumatic

power supplies to the equipment.

081200MS

2. If the equipment is to be operated in an environment which

is exposed to excessive accumulations of lint or air borne

garment fibers, we suggest the use of a shop style vacuum

cleaner. Use a soft brush attachment and carefully vacuum

the area around the fresh air intake vents and the circulation

fan and finger guard assembly. (See illustrations at right)

Circulation Fan and Finger Guard

Fresh air intake vents

The frequency of the following preventive maintenance procedure is

based on a 8 hour daily production shift or 40 hour work week.

Questions and Answers:

Need help?

Do you have a question about the M&R CHALLENGER II Series and is the answer not in the manual?

M&R CHALLENGER II Series Specifications

General