- 5 -
2. Getting started
2.1 Charging
Be sure to fully charge the gimbal before the rst use.
If the battery is very low, we suggest you charge it straight away.
1
1
2
2
1 2
Gimbal and handle
charging when connected.
If disconnected, for gimbal
charging only
For handle
charging only
2.2 Install the tripod
Install the 3/8 - 1/4 inch thread insert on the 1/4 inch screw on the top of the tripod (The
thread insert is factory mounted). Mount the tripod to the bottom of the gimbal or handle,
then deploy the tripod and place the gimbal on a at surface.
2
1
To Next Page
Loading...
