Manitou 150 AETJ - Battery Trays; Bleed

BLEED Battery trays
NOTE: The battery covers are removed.
- Locate the rigid pipe
1
in the battery.
- Locate the flexible pipe
2
and the aspirator bulb
3
in one of the batteries.
- Connect the rigid pipe to the flexible pipe.
- Connect the flexible pipe to the aspirator bulb.
- Drain the water contained in the battery tray.
- Repeat these steps for the other battery.
- Put the battery covers
4
back in place.
RESET Maintenance warning
Where the maintenance warning needs to be reset, e50H-PERIODIC MAINTENANCE- EVERY 50HOURS OF SERVICE OR
3MONTHS.
3 - 24
1
2
3
4
647536 (26/11/2020) 150 AETJ/AETJ 3D - 150 AETJ C/AETJ C 3D - 170 AETJ L