Manitou 150 AETJ - Overload Alarm Light; Maintenance;Fault Alarm Indicator Lamp; Battery Charger Status Indicator Lamp; Battery Cut-Off

14 - MAINTENANCE/FAULT ALARM INDICATOR LAMP
Illustration = second version.
eDESCRIPTION OF THE MULTI-FUNCTION DISPLAY: MAINTENANCE WARNING and
FAULT CODES.
13 - OVERLOAD ALARM LIGHT
Illustration = second version.
The indicator lamp flashes and the audible alarm sounds continuously when the load
in the basket has reached maximum capacity. All the platform's functions are locked,
eOPERATING THE PLATFORM: LOCKED FUNCTIONS.
- To stop the overload alarm:
• Remove excessive load.
NOTE: If the indicator lamp
14
flashes at the same time,eDESCRIPTION OF THE
MULTI-FUNCTION DISPLAY: FAULT CODES.
15 - BATTERY CHARGER STATUS INDICATOR LAMP
Illustration = second version.
eCHARGE THE BATTERIES.
16 - BATTERY CUT-OFF
Position ON
- Turn the handle a quarter turn: current flows.
Position OFF
- Turn the handle a quarter turn: current does not flow.
2 - 37
13
14
15
16
647536 (26/11/2020) 150 AETJ/AETJ 3D - 150 AETJ C/AETJ C 3D - 170 AETJ L