Manitou 150 AETJ - Control Handle; Rotation Mode Selection Switch

23 - CONTROL HANDLE
Illustration = second version.
t
IMPORTANT
t
The proportional control handle must be operated smoothly, without jolting.
The control handle enables use of all the platform functions.
DRIVING AND BRAKING
- Refer to the activation switch
30
.
STEER TO THE LEFT
- Press and hold down trigger
A
.
- Press and hold down button
B
.
- Release it or release the trigger to stop.
NOTE: The
30B
indicator lamp comes on when the
B
button is pressed. The driving
function is activated for 8 seconds.
STEER TO THE RIGHT
- Press and hold down trigger
A
.
- Press and hold down button
C
.
- Release it or release the trigger to stop.
NOTE: The
30B
indicator lamp comes on when the
C
button is pressed. The driving
function is activated for 8 seconds.
OTHER FUNCTIONS
- Refer to the
24
and
29
switches.
NOTE: The functions cannot be activated if the trigger
A
is released.
24 - ROTATION MODE SELECTION SWITCH
Illustration = second version.
The control handle and the trigger on the control handle must be released before
selecting the appropriate rotation mode.
TURN THE BASKET
- Put the switch in the
position.
- Press and hold down the trigger of the control handle.
- Turn the basket to the left:
• Push and hold the control handle to the left.
• Release it or release the trigger to stop.
- Turn the basket to the right:
• Push and hold the control handle to the right.
• Release it or release the trigger to stop.
TURN THE TURNTABLE
- Put the switch in the
position.
- Press and hold down the trigger of the control handle.
- Turn the turntable to the left:
• Push and hold the control handle to the left.
• Release it or release the trigger to stop.
- Turn the turntable to the right:
• Push and hold the control handle to the right.
• Release it or release the trigger to stop.
24
2 - 40
23
C
B
A
30B
647536 (26/11/2020) 150 AETJ/AETJ 3D - 150 AETJ C/AETJ C 3D - 170 AETJ L