Manitou 150 AETJ - SAFETY COMPONENTS

SAFETY COMPONENTS
TURNTABLE LOCKING PIN
Locking the turntable prevents it from rotating.
Position
1A
: The turntable is unlocked.
Position
1B
: The turntable is locked.
LOCK THE TURNTABLE
- Put the turntable in neutral position.
- Put the pin in the hole in the chassis (position
1B
).
UNLOCK THE TURNTABLE
- Put the pin back in its housing (position
1A
).
GUARDRAIL
t
IMPORTANT
t
Do not attach the guardrail with a clamp, twine or any device that could prevent it from functioning properly.
- Raise the guardrail and keep it raised to get in and out of the basket.
HARNESS ATTACHMENT POINTS
t
IMPORTANT
t
Only one operator is permitted to use each attachment point.
- Attach security harnesses to attachment points in the basket.
NOTE: 2 attachment points,
eSTICKERS: HARNESS ATTACHMENT POINTS.
2 - 28
1A
1B
647536 (26/11/2020) 150 AETJ/AETJ 3D - 150 AETJ C/AETJ C 3D - 170 AETJ L