Manitou 150 AETJ - DESCRIPTION OF THE MULTI-FUNCTION DISPLAY

DESCRIPTION OF THE MULTI-FUNCTION DISPLAY
BATTERY CHARGE LEVEL
The bar graph indicates the battery charge level from 0% to 100%, with each segment
representing 10%.
It flashes when the batteries are below 30% charge.
Examples:
-
A
= 100%:
• The batteries are fully charged.
-
B
= 20%:
• The batteries are low, they need charging,eCHARGE THE BATTERIES.
• A fault code is displayed,eDESCRIPTION OF THE MULTI-FUNCTION DISPLAY:
FAULT CODES.
• It is no longer possible to raise the main arm or the secondary arm, or to extend
the telescope.
MAINTENANCE WARNING
t
IMPORTANT
t
Maintenance may be necessary when:
MAINTENANCE
C
is displayed and the key
D
flashes.
The maintenance/fault alarm indicator lamp
14
is on.
Always consult the maintenance personnel when a maintenance warning is displayed.
The maintenance warning is displayed after every 50 hours of service.
Maintenance can be carried out before the alert depending on how much the platform
has been used, for example:
- Maintenance is required every 50 hours of service or every 3 months.
- The platform has reached 3 month of service and 40 hours of operation.
- Maintenance has been performed but it is not possible for maintenance personnel
to reset the warning before 50 hours of service.
- The warning will be displayed when 50 hours of service are reached.
- In this case, maintenance personnel can reset the warning.
2 - 45
A
B
C D
14
647536 (26/11/2020) 150 AETJ/AETJ 3D - 150 AETJ C/AETJ C 3D - 170 AETJ L